No results were found for the filter!
Explosion protection
DN 19 (3/4")
2 m
Hose set explosive media
for aggressive and highly flammable liquids
Description: The hose set is suitable for pure chemicals and explosive liquids. The hose is electrically conductive, so it can also be used in explosive environments. The set is used for connection to the pumping station or the nozzle. also available in special lengths on request electrically conductive Features & Advantages Hose connection: 1 1/4" IT Nominal width: DN 19...
Bracket
for Container pump B200
Description: The bracket relieves pressure on the discharge spout when heavy engines are used and the turnbuckle cannot be used.
Akku
Battery
suitable for the Motor B1 Battery
Description: The battery is suitable for the battery motor B1 Battery and consists of high quality Li-Ion cells. 1 battery charge empties approx. 2.6 x 200 litre containers Features & Advantages long life span high cycle stability Voltage: 10,8 V
Charger 10,8V
passend für den Motor B1 Battery
Description: Charger for the Motor B1 Battery (without battery) Features & Benefits Input: AC 100-240 V, 50/60 Hz
Monitoring module SafetyBox
applicable for Lutz Drum and Container pumps...
Description: Dynamic seals should be changed after prescribed operating times. With mobile pumps, it is difficult to monitor the operating time, so that the wear of important components can increase and lead to leakage. The perfect solution to prevent this wear is the monitoring module that detects seal leakage in advance. easy installation by attaching a leakage sensor to...
PP
Foot strainer
suitable for Pump tube PP or suction pipe
Description: The foot strainer can be used for Pump tubes PP, PVDF, aluminum and stainless steel. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller). to be plugged onto the pump base, as well as the suction pipe with Ø 41mm Features & Advantages Prevents impurities from entering Pump...
PP
1,5 m
Hose set
for Drum pump B1/B2 Battery and B2 Vario
Description: The hose set is for thin-bodied, aqueous to slightly viscous media. The set is suitable for barrel pumps series B1 and B2. also available in special lengths on request
PVDF
1,5 m
Hose set
for Drum pump B1/B2 Battery and B2 Vario
Description: The hose set is for thin-bodied, aqueous to slightly viscous media. The set is suitable for barrel pumps series B1 and B2. also available in special lengths on request
Niro
1,5 m
Hose set
for Drum pump B1/B2 Battery and B2 Vario
Description: The hose set is for thin-bodied, aqueous to slightly viscous media. The set is suitable for barrel pumps series B1 and B2. also available in special lengths on request
PP
Emission protection Drum adapter PP
suitable for laboratory pump B1/B2 Battery PP...
Description: Prevents hazardous gases from escaping from the Drum when using a Drum pump. This protects the operator, the environment and the drive motor from hazardous gases. Two vent valves provide pressure equalization between the inside of the drum and the surrounding atmosphere. Seal: FPM Features & Benefits Protection against escaping gases Screw-in thread: G 2" AG...
PP
Lutz tap valve PP
suitable for Drum- and laboratory pump B1/B2...
Description: For filling and transferring neutral and aggressive liquids. The liquid flow can be easily adjusted by means of a rotary closure. The body of the dispensing valve is made of the material polypropylene (PP) and has a suspension bracket. The valve is sealed by means of an FPM seal. the outlet spout has a diameter of 12 mm Features & benefits Connection: hose...