No results were found for the filter!
Ex-protection
Rotor
Pump tube HC
for flammable chemicals
Description: The Lutz Pump tube (HC) is suitable for thin-bodied, inflammable and highly corrosive chemicals. Depending on the application different Motors are available which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped...
Stainless steel shaft
Impeller
Pump tube PP for residual emptying
for low viscosity lyes
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
HC Wave
Impeller
Pump tube PP for residual emptying
for low viscosity acids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
Ex-protection
Impeller
Pump tube Niro for residual drainage
for flammable liquids
Description: The Lutz Pump tube for residual emptying (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm...
Stainless steel shaft
Impeller
Pump tube PP for mixing and pumping
for low viscosity lyes
Description: The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with Lutz original...
HC Wave
Impeller
Pump tube PP for mixing and pumping
for low viscosity acids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
Ex-protection
Rotor
Pump tube Niro for mixing and pumping
for flammable liquids
Description: The Lutz Pump tube (Niro) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with Lutz original...
PVDF
Rotor
Pump tube PVDF
suitable for B2 Vario and B2 Battery
Description: The Lutz Pump tube (PVDF) is suitable for thin-bodied, concentrated acids and alkalis. With the appropriate Motor it is suitable for medium to large filling quantities. Depending on the requirements, the Pump tube can be operated with the electric motor B2 Vario or the battery version B2 Battery. Media examples: Chloric acid, chromic acid, sulphuric acid. Nitric...
Niro
Rotor
Pump tube Niro
suitable for B2 Vario and B2 Battery
Description: The Lutz Pump tube (Niro) is suitable for low viscosity, oil based lubricants, cold cleaners and softeners. With the suitable Motor it is suitable for medium to large filling quantities. Depending on the requirements, the Pump tube can be operated with the electricMotor B2 Vario or the battery version B2 Battery. Media examples: Lubricants (oil-based), cold...
Stainless steel shaft
Rotor
Pump tube PP for mixing and pumping
for low viscosity lyes
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
HC Wave
Rotor
Pump tube PP for mixing and pumping
for low viscosity acids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
PP
Rotor
Pump tube PP
suitable for B2 Vario and B2 Battery
Description: The Lutz Pump tube (PP) is suitable for low viscosity, oil based lubricants, cold cleaners and softeners. With the suitable Motor it is suitable for medium to large filling quantities. Depending on the requirements, the Pump tube can be operated with the electricMotor B2 Vario or the battery version B2 Battery. Media examples: Lubricants (oil-based), cold...