首頁 / 推姆遜刀
一段刃-CENTER BEVEL
 |
Most widely used for Conventional paper board ★Production & Supply after being or dered(in case of non-stanard goods) ★Steel rule can be ordered in straight lengths or coils |
Notation (記號) |
Thick (m/m) |
width(寬) (m/m) |
Hardness(硬度)(HS) |
Length(長) (m/m) |
Bevel form(傾斜面) |
|
Body(刀身) |
Edge(刀刃) |
|||||
| HPB-(1-1) | 0.53 | 23.60 | 47 | --- | 1000 | CENTER BEVEL |
| HPB-(1-2) | 0.53 | 23.80 | 47 | --- | 1000 | |
| HPB-(1-3) | 0.71 | 23.60 | 48 | --- | 1000 | |
| HPB-(1-4) | 0.71 | 23.60 | 52 | --- | 1000 | |
| HPB-(1-5) | 0.71 | 23.80 | 48 | --- | 1000 | |
| HPB-(1-6) | 0.71 | 23.80 | 52 | --- | 1000 | |
| HPB-(1-7) | 1.05 | 23.80 | 47 | --- | 1000 | |
| HPB-(1-8) | 1.05 | 23.80 | 52 | --- | 1000 | |